• 删除历史
  • 铸钢气动插板阀1.0MPa
    阀体材质:WCB
    压力等级:国1.0MPa
    连接方式:对夹
    驱动方式:气动
    工作温度:~-29℃~425℃
    适用介质:水、蒸气、油等
    密封材质:304
    阀杆材质:2Cr13
    闸板材质:201
    特殊要求:普通型
    生产地:温州
    选择口径
  • DN200
  • DN250
  • DN300
  • DN400
  • DN450
  • DN500
  • DN600
  • DN700
  • DN800
  • DN900
  • DN1000
  • 企业名称: 中诚阀门集团有限公司 询价:0次
    立即询价

    中诚阀门  铸钢气动插板阀1.0MPa

    插板阀用途 

    螺旋阀门是一种粉料、晶粒料、颗粒料及小块物料的流量或输送量的主要控制设备,广泛应用于矿山、粮食等行业控制流量变化或迅速切断(特料直径≤50mm)

    类别CategoryA×AB×BC×CLHD0n-d

    单向 

    One-way

    220×200256×256296×2961008203008-φ12
    250×250306×306346×3461009303408-φ14
    300×300356×356396×39610010503808-φ14
    400×400456×456496×496100114044512-φ14
    450×450510×510556×556120145053012-φ18
    500×500560×560606×606120161058016-φ18

    双向 

    Two-way

    600×600660×660706×706120183045016-φ18
    700×700770×770820×820140213045020-φ18
    800×800870×870920×920140244045020-φ18
    900×900974×9741030×1030160266045024-φ23
    1000×10001074×10741130×113160287045024-φ23
    说明Specification

    LMD-单向 

    LMD one-way

    Ⅰ-手轮 

    I hand wheel

    链条节数M=0.105×-113(×是丝杆中心离地面高度)距地面小于1.7米用于手轮大于1.7米用链轮 

    Number of chain nodes M = 0.105×-113 (× means the distance of lead screw center from surface); use hand wheel if the height is less than 1.7 m; use chain wheel if the height is more than 1.7 m.

    LMD-双向 

    LMD two-way

    Ⅱ-链条

    II chain

    注:可来图来样定作非标的螺旋闸门 
    Note: Non-standard screw gate valve could be customized based on drawing or sample.